When a bathroom addition needs rough-in work, a kitchen remodel calls for new supply and drain lines, or a replacement appliance has to be connected correctly the first time, getting the plumbing right at the start saves a great deal of trouble later. Kirby is a town where homes have been added onto, updated, and handed down, and the plumbing in those properties reflects that history. Some of it is solid. Some of it is a patchwork of materials and methods that made sense at the time. Either way, we handle the work that keeps it all running.
Whether you are a homeowner planning a renovation or a landlord keeping a rental unit in good shape, the process starts the same way. Call, describe what you are dealing with, and we scope the job on the phone before anything is scheduled. We cover Kirby for the full range of plumbing repair and installation, every day from 7:00 AM to 8:30 PM.
Some plumbing jobs in Kirby are straightforward repairs that do not require any approval beyond completing them correctly. Others, particularly work that involves moving or adding supply lines, replacing a water heater, or altering the drain and vent configuration, may require a permit and a follow-up inspection before the work is considered closed out.
The rules vary by municipality, and Bexar County properties can fall under different jurisdictions depending on the address. What stays consistent is that permitted work protects the property owner. An inspection confirms the work meets current code, which matters if you ever sell the property or make a claim on it. We handle the permit side of a job where it applies, and we confirm what is required before the work begins rather than after.
If you are not sure whether your job needs a permit, ask when you call. We will tell you what we know about the scope and what the process typically looks like.
A toilet that keeps running after the flush has finished is wasting water continuously, and the cause is usually a worn flapper, a failing fill valve, or a float that is no longer set correctly. A toilet that is leaking at the base is a different problem, one that often points to a failed wax seal and needs attention before water works into the subfloor. We diagnose which situation you have and repair or replace the component that is causing it.
When a toilet rocks, leaks persistently, or is being replaced as part of a bathroom update, reseating or full replacement is the right call. Reseating involves pulling the toilet, replacing the wax seal and inspecting the flange, and resetting the unit correctly. A replacement follows the same process but adds selecting the right unit for the rough-in distance. Both jobs are straightforward when done properly and a source of recurring problems when they are not.
A slow drain is easy to ignore until it stops draining entirely. Kitchen drains accumulate grease and food debris. Bathroom drains collect hair and soap buildup. When the blockage is further down the line, a standard snake may not reach it, and that is where hydro jetting becomes the more effective tool. High-pressure water clears buildup from the pipe wall rather than just pushing it further along. If a drain in your home keeps backing up in the same spot, the problem is likely further down than it appears.
A pipe that has burst or split needs to be addressed before the water damage compounds. The first step is getting the water off at the shutoff, which stops the immediate problem. The repair itself depends on where the break is, what the pipe is made of, and how much of the surrounding material has to come apart to reach it. Galvanized, copper and PEX pipes each fail in their own way, and the repair approach follows the material and the location.
A slab leak is a supply line failure beneath a concrete foundation, and it is one of the harder problems to catch early. The signs are often indirect: a water bill that climbs without explanation, warm spots on the floor, or a drop in pressure that has no obvious cause. We use pressure testing and electronic detection to locate the source without opening up more of the slab than necessary. Once the leak is found, we repair the affected section and pressure-test the line before the job is called done.
A water heater that is not performing can usually be diagnosed quickly. Sediment buildup in the tank, a failed heating element, a faulty thermostat, or a pressure relief valve that is no longer working are all repairable problems on a unit that is otherwise in good condition. When the tank itself is corroding or the unit has reached the end of its useful life, replacement is the more practical answer. We cover that decision on the call so you know what to expect before anyone shows up.
We are available every day from 7:00 AM to 8:30 PM, including weekends. When you call, you reach someone who knows the trade and can scope the job on the phone. The price is confirmed before anything is scheduled, and the scope is settled before anyone arrives. If your situation is not urgent, we work around your availability. If it is, we tell you what the schedule allows and get you in as quickly as we can.
A burst pipe, a sewer backup, a complete loss of hot water, or a major leak that is actively causing damage are all situations that cannot wait. We take short-notice calls and prioritize emergency work during our hours.
Call (830) 445-3954, describe what is happening, and we will get it on the schedule.
For rental properties and businesses that need to stay operational, we work around the constraints of the property where the job allows. A commercial kitchen with a clogged drain, a multi-unit building with a water heater outage, or a rental that needs a repair turned around quickly are all calls we handle the same way: scope it, price it, and get it done.
The rate is confirmed on the call, before anything is scheduled. What affects the price is what the fault turns out to be and what has to come apart to reach it. A drain that clears with a snake is a different job from one that needs hydro jetting. A pipe repair that is accessible behind a panel is a different job from one buried under a slab. We explain what the job involves and what it costs before any work begins.
What you will not get is a number that changes once someone is on site without a conversation first. If the scope turns out to be larger than what was described on the call, we tell you before we proceed, not after. No pressure and no gimmicks, just sound, lasting plumbing.
The more specific you can be about what you are seeing, the more accurate the estimate will be. Where the problem is located, when it started, whether anything has changed recently, such as a change in water pressure, a new stain, or an unusual sound, all of that helps scope the job on the phone. If you have already tried something, mention it. Read our services page for what to expect step by step.
Kirby's housing stock includes homes that have been extended, updated, and in some cases replumbed in sections over the years. A water heater that was sized for the original footprint of a house may not be keeping up with a property that now has an added bathroom or a larger household. The symptom is usually running out of hot water faster than expected, which points to either a capacity problem or a failing component.
Tank water heaters are the most common type in this area, and they have a finite useful life. A unit that is leaking, making a rumbling sound, or producing discolored water at the hot faucet is telling you something. Tankless units are an option when a replacement is being planned and the property's demand and gas or electrical supply support it. We cover the repair-versus-replacement decision on the call and explain what the installation involves before anything is scheduled.
For properties with additions or converted spaces, we confirm that the existing water heater and supply lines are adequate for the current layout. If they are not, we explain what the upgrade involves and what it will cost.
A dishwasher, a washing machine, a refrigerator with a water line, a new garbage disposal, or a replacement faucet all need to be connected to the supply and drain correctly. The connection itself is not complicated, but the consequences of getting it wrong are. A supply line that is not properly seated, a drain connection that is not vented correctly, or a disposal that is wired and plumbed without checking the existing configuration can all cause problems that are more expensive to fix than the original installation.
We handle appliance and fixture connections as part of a broader job or as a standalone call. Garbage disposal installation, faucet and sink repair, and supply line replacements all fall within the work we do. If you are having a new appliance delivered and want the plumbing connection handled at the same time, call ahead and we will schedule accordingly.
Backflow prevention devices and water filtration or softener installations also fall within this category. Water hardness varies across this region, and a properly installed softener protects fixtures, water heaters, and supply lines from the scale buildup that hard water causes over time. We size and install whole-home systems and confirm the connections are correct before leaving.
We serve Kirby and the neighboring communities throughout this part of Bexar County. That includes Windcrest, Terrell Hills, Alamo Heights, China Grove, and Converse. If your property is in or near Kirby and you are not sure whether your address falls within our service area, call and we will confirm. Most of the time, the answer is yes.
Coverage extends across the broader county and the surrounding area. We take residential calls, rental property calls, and commercial plumbing calls throughout the area, every day from 7:00 AM to 8:30 PM.
Insurers sometimes ask for a description of the cause, the scope of the repair, and confirmation that the work was completed. Call and let us know what your insurer is asking for and we will tell you what we can put together for you.
Yes.
If you manage a rental and want your tenants to be able to call directly when a plumbing problem comes up, (830) 445-3954 is the number to give them.
We scope the job on the call and handle the scheduling from there.
Describing symptoms in detail actually speeds things up. The more specifically you can describe what you are seeing, such as where the problem is, when it started, and what has changed, the better we can scope the job on the call and arrive with the right approach in mind.
A slow drain, a slab leak, a water heater that stopped working, a burst pipe in the wall, or a fixture that has never been connected correctly. Whatever the job is, we scope it on the call, confirm the price before we start, and carry out the work with drain and pipe work carried out to code.
Call Schertz Plumbing Company at (830) 445-3954 and we will take care of it.
Close by, we also take plumbing work in: Windcrest, Terrell Hills, Alamo Heights, Converse, Live Oak.
See our list of communities.
From a dripping faucet to a sewer line backup, we handle the full range of residential and commercial plumbing repair and installation throughout Kirby and Bexar County. Every job starts the same way: a call, a scope, and a price before anything is scheduled. The table below covers what each service includes, who it fits, and what is worth knowing before you call.
| Service | What It Covers | Recommended For | Good to Know |
|---|---|---|---|
| Faucet & Fixture Installation | Dripping faucet repair and replacement, Kitchen and bathroom fixture installation, Shower and tub fixture work, Remodel and upgrade connections | Homeowners upgrading fixtures or dealing with drips, leaks, or fixtures that no longer work correctly | A dripping faucet wears out the valve seat over time and wastes water steadily. We repair or replace the fixture and confirm no connections are leaking before the job is called done. |
| Garbage Disposal Service | Disposal diagnosis and repair, Full unit replacement, Leak at base or drain connection, Humming or seized disposal reset | Homeowners with a disposal that hums but will not turn, leaks, or has stopped working altogether | Many disposal problems come down to a seized motor or a failed seal rather than a full unit failure. We diagnose the cause first and replace the unit only when repair is not the practical answer. |
| Water Heater Repair & Replacement | Tank and tankless unit diagnosis, Heating element and component repair, Full unit replacement and sizing, Gas and water line connections | Households or businesses with no hot water, inconsistent heating, or a unit that is leaking or aging out | We walk through the repair versus replacement decision on the call. If an upgrade from tank to tankless is the right move, we handle the gas or water line connections as part of the installation. |
Call (830) 445-3954 to talk through your plumbing situation, get a scope of the work, and find out what it will cost before anything is put on the schedule.
(830) 445-3954